top of page

Radiators & Valves

We offer a wide range of radiators and valves, from LSTs to Cast Iron. We are also able to provide custom radiator solutions such as angled or curved radiators. Below is an example of our range, along with downloadable literature on each. To download our full Radiator & Valve brochure, please click here.

​

​

​

​

Jump to:

 

Steel
mhs-radiators-logo-1.jpg
Steel Panel Radiators
Matrix Plus Horiziontal Close.jpg

Matrix Plus

 

The Matrix Plus is a well-engineered, robust radiator suitable for both commercial and domestic applications. All models are manufactured from 70mm x 10mm steel tubes welded to ø35mm round headers, with 1.5mm material thickness. The Matrix Plus has a maximum working pressure of 4.6 bar and is tested to 6 bar. Connections are ½” with multiple connection patterns available. As standard, the radiators are powder coated in RAL 9016, with other RAL colours available on request. The Matrix Plus is guaranteed for 5 years against manufacturing defects.

Download logo.png
MHS Galant Radiator.png

Galant

 

The Galant radiator is manufactured from 1.2mm steel and is available in RAL 9016 Traffic White as standard, with other colours available on request. Available in horizontal and vertical models, and Type 20, 21, 22 and 33. Supplied complete with wall brackets, plugs and air vent, welded side panels and top grille as standard, the Galant horizontal radiator has a 6 bar maximum working pressure (8 bar test), with 10 bar maximum working pressure available upon request. The Galant is supplied with 6 x 1/2” bsp-f connections, offering multiple connection options.

Download logo.png
MHS Galant Plan Radiator.png

The Galant Plan radiator is manufactured from 1.2mm steel with a 0.5mm aluminium front plate and is available in RAL 9016 Traffic White as standard, with other colours available on request. Available in horizontal and vertical models, and Type 20, 21, 2 and 33. Supplied complete with wall brackets, plugs and air vent, welded side panels and top grille as standard, the Galant radiator has a 6 bar maximum working pressure (8 bar test), with 10 bar maximum working pressure available upon request. The Galant is supplied with 6 x 1/2” bsp-f connections, offering multiple connection options.

Galant Plan

 

Download logo.png
Matrix-Convector.jpg

Matrix Convector

 

The Matrix Convector is made from 1.5mm steel and finished in RAL 9016 Traffic White. Other RAL colours are available at additional cost. Supplied with floor brackets as standard (wall brackets are available on request), this radiator has a 5.4 bar maximum working pressure (mwp) (tested to 7 bar) as standard. A high pressure, 2mm steel version with 10 bar mwp (13 bar test) is also available at extra cost. There are 2 x ½” bsp connections (BBOE 2 and 4 detail) as standard unless otherwise specified.

Download logo.png
Galant-Boost-3-940x622-1.jpg
Galant-Plan-Boost-4-940x622-1.jpg
MHS-Centara.jpg

The Galant Boost radiator is manufactured from 1.2mm steel. Fitted with robust, discrete fans, it is ideal for low temperature heating systems within commercial applications.

Supplied complete with wall brackets, plugs and air vent, welded side panels and top grille as standard, the Galant Boost radiator has a 6 bar maximum working pressure (8 bar test). The Galant Boost is supplied with 6 x 1/2” bsp-f connections, offering multiple connection options.

Galant Boost

 

Download logo.png
Download logo.png

Galant Plan Boost

 

The Galant Plan Boost radiator is manufactured from 1.2mm steel with a 0.5mm aluminium front plate and is available in RAL 9016 Traffic White.

Supplied complete with wall brackets, plugs and air vent, welded side panels and top grille as standard, the Galant Plan Boost radiator has a 6 bar maximum working pressure (8 bar test). The Galant Plan Boost is supplied with 6 x 1/2” bsp-f connections, offering multiple connection options.

Download logo.png
Download logo.png

Centara

 

The Centara radiator range is manufactured from 1.2mm steel and is available in RAL 9016 Traffic White as standard, with other colours available on request.

Supplied complete with wall brackets, plug and air vent, welded side panels and top grille as standard, the Centara radiator has a 6 bar maximum working pressure (8 bar test). The Centara is supplied with underside 50mm connections.

Download logo.png
Column
Steel Column Radiators
Multisec in Clay.jpg
MHS Multisec Bench Column Radiator.png

The Multisec radiator is made from 25mm diameter, 1.2mm steel with 1.5mm headers. It is finished in RAL 9016 Traffic White as standard (with other colours available). Each radiator is supplied with wall brackets, plug and air vent. Capable of operating up to 8 bar (tested to 10 bar), each Multisec radiator has ½”bsp-f connections (standard connection detail 08 = BBOE). Alternative configurations are also available (some at extra cost), although these must be specified with each order (see main Multisec sales brochure for more information). The Multisec radiator carries a 5-year guarantee against manufacturing defects.

Multisec

 

Download logo.png

Multisec Bench

 

For the conservatory, locker room or bathroom, seating and heating can be combined in the Multisec Bench radiator to maximise both space and comfort. This radiator has a hardwood top, providing a place to sit and relax in comfort without getting cold.

Download logo.png
MHS Multisec Raw Column Radiator.png

The classy Multisec Raw multi column radiator offers a contemporary industrial look with its polished and machined metal finish set beneath a deep lacquer. This radiator is available in any size chosen from the Multisec range and is made from the same 25mm diameter, 1.2mm steel with 1.5mm headers. Each radiator is supplied with wall brackets, plug and air vent. Capable of operating up to 8 bar (tested to 10 bar), each Multisec Raw radiator has ½”bsp-f connections (standard connection detail 08 = BBOE).

Multisec Raw

 

Download logo.png
Aluminium
Aluminium Radiators
MHS Decoral 97 Aluminium Radiator.png

Decoral 97

 

The aluminium Decoral 97 is finished in RAL 9010 Warm White as standard and can operate up to 6 bar maximum working pressure (tested to 8 bar). Due to its sectional nature, it can be assembled to any length required from stock, offering a versatile radiator with a quick delivery time. Radiators are supplied complete with wall brackets and ½” bsp-f connections. The Decoral carries a 10-year guarantee against manufacturing defects.

Download logo.png
MHS Decoral Vertical Aluminium Radiator.png

The aluminium Decoral Vertical is finished in RAL 9010 Warm White as standard and can operate up to 6 bar maximum working pressure (tested to 8 bar). Due to its sectional nature, it can be assembled to any length required from stock, offering a versatile radiator with a quick delivery time. Radiators are supplied complete with wall brackets and ½” bsp-f connections. The Decoral carries a 10-year guarantee against manufacturing defects.

Decoral Vertical

 

Download logo.png
Dubal small.jpg

Dubal

 

The Dubal 30 is a unique 147mm depth die-cast aluminium radiator, providing versatility when a low level radiator is required. The radiator is reversible, providing a choice of flat-fronted or open-fronted style. The Dubal 30 can be paired with free-standing feet, ideal for when the radiator is positioned in front of glazing.
 

Download logo.png
Extratherm.jpg

A fusion of cutting-edge design and recycled aluminium, the Extratherm 97 features a rounded top and open-fronted curves for a touch of continental charm. Lightweight and versatile, it is ideal for use with heat pumps and other renewable heating technologies. The Extratherm 97 also has excellent outputs and thermal efficiency in a small footprint.
 

Extratherm 97

 

Download logo.png
Decoral 77.jpg

Available in a variety of heights, the Decoral 77 is a slim version of our popular Decoral 97 aluminium radiator. Ideal for hallways and tight spaces, the attractive and lightweight model boasts high outputs and is ideal for use with heat pumps and other renewable heating technologies.
 

Decoral 77

 

Download logo.png
Cast Iron
Cast Iron Radiators
MHS Ionic Cast Iron Radiator.png

The Ionic is a cast iron radiator supplied in an Umber Grey Primer as standard which requires painting by others, with painted finishes available at additional cost. The radiator has a maximum working pressure of 6 bar with a maximum test pressure of 7.8 bar (water test only). Integral feet and wall ties are supplied as standard, while a wall mounted version can also be specified at no additional cost. All radiators are supplied with ½” bsp-f (BBOE) connections, ¾”or 1” connections, while TBOE or TBSE connections are also available (to be specified at time of order). The Ionic radiator carries a 10-year guarantee against manufacturing defects.

Ionic

 

Download logo.png
Clasico_1-close-up (1).jpg
MHS Liberty Cast Iron.png

Clasico

 

The Clasico is made from cast iron and supplied in white primer as standard that requires over painting, while painted finishes are available at additional cost. The radiator has a maximum working pressure of 6 bar with a maximum test pressure of 7.8 bar (water test only). Feet and wall ties are supplied as standard, while a wall mounted version can also be specified at no additional cost. All radiators are supplied with ½” bsp-f (BBOE) connections or ¾” connections, while TBOE or TBSE connections are also available (to be specified at time of order). The Clasico radiator carries a 10-year guarantee against manufacturing defects. Clasico is supplied as standard with integrated feet and all fixing/ties.

Download logo.png

The Liberty is made from cast iron and supplied in Umber Grey Primer as standard that requires over painting, with painted finishes available at additional cost. The radiator has a maximum working pressure of 6 bar with a maximum test pressure of 7.8 bar (water test only). Feet and wall ties are supplied as standard. All radiators are supplied with ½” bsp-f (BBOE) connections, ¾”or 1” connections, while TBOE or TBSE connections are also available (to be specified at time of order). The Liberty radiator carries a 10-year guarantee against manufacturing defects.

Liberty

 

Download logo.png
LST
LST Radiators
Ambiguard_Style_B_940x622.jpg
MHS Secureguard LST.png

Ambiguard Style B

 

The Ambiguard Style B Casing c/w finned element LST is made from 1.2mm steel casing finished to Pure White semi matt RAL 9010 finish with 11 other preferred colours available at additional cost. The Ambiguard casing is supplied with rounded corners, lockable access panel, pencil proof grilles and a heat reflective backplate. This model houses a finned tube element, which has 8 bar maximum working pressure with 15mm TBOE connections and automatic air vent. The Ambiguard LST carries a 5-year guarantee against manufacturing defects and can be provided with optional internal or external TRV valve sets, and pipe work cutouts at additional cost. 

Download logo.png
Download logo.png

Secureguard LST anti-ligature radiators. The Secureguard comes in two styles, B or T. Style B has a top outlet grille and front facing lower inlet grille, while Style T has a solid top with front facing outlet and inlet grilles. All Secureguard LST radiators are supplied complete with a panel radiator, with a choice of a Type 11 (120mm depth casing), a Type 22 (180mm depth) or a Type 33 (240mm depth). All the radiators have a maximum working pressure of 10 bar (13 bar test).

Secureguard

 

Download logo.png
Towel Rails
Towel Rails
Nina-Matt-black-bathroom_cmyk-940x622-1.jpg

A simple design, complemented by carefully considered details, such as discreet brackets, ensure this towel rail is a great addition to any bathroom. Available in over 70 finishes, there is a Nina towel rail for any bathroom style, with the most popular finishes available from stock.

Stocked in Milky, Quartz Dust, Sparkling Grey, Sparkling Black, Matt Black and Denim Blue, which are all textured finishes. Also stocked in Chrome.

Nina

 

Download logo.png
Lara-940x622-images-5-NEW.jpg

Lara

 

The Lara towel rail features 30mm vertical collectors and 25mm horizontal tubes, available in Polished, Satin, Antique Brass and Antique Copper finishes.

All models are supplied with a fixing kit, including brackets, air vent, hexagonal tool, plugs and screws.

Download logo.png
Comb-940x622-images-1.jpg

A deceptively simple design that puts a twist on a classic ladder style. Towels can be hung with ease thanks to the open ended design, while large tubes deliver impressive outputs.
Plus, for greater design freedom, Comb is available in a variety of finishes, including Polished and Satin stainless steel, as well as coloured steel models.

Comb

 

Download logo.png
Valves
Valves
MHS Radius TRV.jpg

Radius TRV

 

Combining high quality engineering with a sleek and elegant style, these beautifully smooth valves provide the perfect finishing
touch to any radiator. Available in an array of stunning finishes, with a choice of angled, corner or straight versions, Radius valves
offer superior heating control while complementing and enhancing a radiator’s design. Also available in a Manual version.

Download logo.png
MHS Sterling TRV.jpg

The Sterling contract TRV is a simple, value engineered valve suitable for most general applications. Available in angle or straight versions. Made from brass with a 5 year guarantee.

Sterling TRV

 

Download logo.png
MHS Chartwell TRV.jpg

Chartwell TRV

 

The Chartwell TRV is a period style thermostatic valve which is available in Brass or Anthracite finish. These valves are a perfect addition to our Cast iron range of radiators. Also available in a Manual version.

Download logo.png
MHS Variocon TRV.jpg

The Variocon is available in manual or TRV versions and can swivel for angled, through the wall connections or simply come up from the floor for straight connections to 15mm copper pipe. This valve is available in nickel and chrome finishes, with the chrome version available with a white or chrome TRV head. Connection centres – 50mm inlet and outlet.

Note: The flow must be on the same side as the TRV head.

Variocon

 

Download logo.png
MHS Ambiguard LST Valves.jpg

Ambiguard TRV

 

The Ambiguard TRV is suitable for our range of Ambiguard LST's, and is available in as a internal or external version depending on the type of control required. All Ambiguard valves are for use on two pipe systems. The TRVs provided are not bi-directional and must always be connected to the flow pipework. All kits are provided with 15mm copper adaptors to provide the connection to both the inlet and outlet of the valve to either ½” BSP or 15mm connection.

Download logo.png
bottom of page